Inogen Rove 6 Annual Maintenance Kit contents: 4 genuine Inogen parts labeled

Inogen Rove 6 maintenance kit parts: particle filter, intake filters, cannula barb and columns

Inogen Rove 6 cannula barb RP-506 with integrated output filter

Inogen Rove 6 replacement columns RP-502 sieve beds

Free Shipping

Inogen Rove 6 Annual Maintenance Kit

Everything your Inogen Rove 6 needs for a year of maintenance, in one box — 4 genuine Inogen parts with a guide on when to change each. No tracking down separate parts, no guesswork.

US$249.00

✓ Genuine new Inogen parts · complete 1-year maintenance kit · everything together, not 4 separate orders

Call (786) 755-8063

Genuine Inogen partsComplete 1-year kitAll-in-one — no guessworkFor Inogen Rove 6

4genuine Inogen parts

1 yearof coverage

1 boxeverything together

DIYwrench included

4genuine Inogen parts

1 yearof coverage

1 boxeverything together

DIYwrench included

Complete 1-year maintenance kit for the Inogen Rove 6
4 genuine Inogen parts: RP-501 particle filter, SP-804 intake filters, RP-506 cannula barb with integrated output filter, RP-502 columns
Everything together in one box — instead of tracking down 4 separate parts
Simpler than the G5: the Rove 6 output filter is changed yearly, not monthly
Genuine new Inogen components · wrench included for easy DIY

Genuine Inogen partsComplete 1-year kitAll-in-one — no guessworkFor Inogen Rove 6

Secure checkout · financing available

VISAAMEXDISC●VERaffirm

SKU: R6-MK
Category: Maintenance Kits

COMPLETE ANNUAL MAINTENANCE · GENUINE INOGEN PARTS

Everything your Rove 6 needs for a year — in one box

Instead of tracking down and ordering four separate parts, the Rove 6 Annual Maintenance Kit puts a full year of maintenance in a single box — the right particle filter, intake filters, output filter, and sieve columns, all genuine Inogen and matched to your model, with a simple schedule for when to change each one.

Genuine Inogen replacement parts. Free U.S. shipping over $99.

Why the kit

A complete year in one box

Four genuine Inogen parts — particle filter, intake filters, output filter, and sieve columns — matched to the Rove 6 and packed together, so you’re set for a full year of maintenance without hunting down part numbers.

Simpler than the G5

On the Rove 6 the output filter is built into the cannula barb and changes just once a year — not every month like the G5. Fewer parts, fewer steps, the same clean therapy.

Easy to do yourself

Change the annual output filter with the wrench included in the kit — a couple of minutes, no technician and no service visit. Clear steps come in the box.

What’s in the kit

Four genuine Inogen parts, chosen for the Rove 6’s maintenance year.

That’s the same $249 as ordering the four parts on their own — the point of the kit is getting them together, matched to your Rove 6, with the schedule for when to change each one.
Component	Part #	Qty	What it does	Sold separately
Particle filter (2-pack)	RP-501	1	Blocks dust and particles at the air intake	$25
Intake filters	SP-804	3	Clean airflow at the inlet — one per quarter	$78
Cannula barb with integrated output filter + spanner wrench	RP-506	1	Connects your cannula and filters the oxygen you breathe — the output filter is built in, changed once a year	$28
Replacement column pair (sieve beds)	RP-502	1	Restores oxygen purity and efficiency	$118

Your Rove 6 maintenance schedule

When each part gets attention across the year. The wider the bar, the more often you do it.

When	What to do	Part #
Weekly	Clean the particle filter	RP-501 — rinse with mild soap, dry
Every 3 months	Swap the intake filter	SP-804 — three included covers the year
Once a year	Change the output filter (in the barb)	RP-506 RP-506 — swap the cannula barb; the output filter is built in
When the unit alerts (~1–2 yrs)	Replace the sieve columns	RP-502 — timing depends on your use

Simpler than the G5: on the Rove 6 the output filter is built into the cannula barb and changes just once a year — on the G5 it’s a separate filter you change every month. Fewer parts, fewer steps, the same clean therapy.

Fits your Inogen Rove 6

This kit is built for the Rove 6. Some parts are shared with the Inogen One G5, others are Rove 6 specific.

Part	In this Rove 6 kit	Also fits the Inogen One G5?
Particle filter (RP-501)	✓	No — Rove 6 specific
Intake filters (SP-804 ×3)	✓	Yes — shared with the G5
Cannula barb w/ output filter (RP-506)	✓	No — Rove 6 specific (integrated output)
Sieve columns (RP-502)	✓	Yes — shared with the G5

Built for the Inogen Rove 6. A couple of parts also fit the Inogen One G5, but the G5 uses a separate output filter changed every month, so it has its own dedicated maintenance kit — call us and we’ll point you to the right one.

How to change the annual output filter

Do it yourself in a couple of minutes

The output filter lives inside the cannula barb, so changing it is one simple swap — no technician, no service visit. The spanner wrench comes in the kit.

Using the included spanner wrench, unscrew and remove the old cannula barb.
Screw in the new RP-506 barb — the fresh output filter is already built in.
Tighten firmly by hand, then snug it with the wrench. That’s it for the year.

Suitable for older adults and caregivers — if you’d like a hand, just call us.

Why keep your Rove 6 maintained

Longer service life

Fresh filters and columns keep your Rove 6 running strong for years instead of straining a tired filter.

Cleaner oxygen

The intake, output, and sieve parts all protect the purity of the oxygen you actually breathe.

Everything together

No guessing which part to order or placing four separate orders — the whole year is in one box, with the schedule.

Peace of mind

Genuine Inogen parts, matched to your model, so upkeep is one less thing to track.

Details

What’s in the box

1× Particle filter 2-pack (RP-501)
3× Intake filters (SP-804)
1× Cannula barb with integrated output filter + spanner wrench (RP-506)
1× Replacement column pair / sieve beds (RP-502)

Why genuine Inogen parts matter

Every part is a genuine Inogen replacement, made to spec for the Rove 6 — the correct fit and filtration, not a generic guess. Real filters and real sieve columns keep your concentrator delivering clean, prescription-grade oxygen.

Compatibility & the G5 kit

This kit is assembled for the Inogen Rove 6. The intake filters (SP-804) and sieve columns (RP-502) are shared with the Inogen One G5, while the particle filter (RP-501) and the cannula barb with integrated output filter (RP-506) are Rove 6 specific. The G5 changes its output filter monthly, so it has its own dedicated kit — ask us and we’ll match you to it.

Frequently asked questions

How often do I replace the sieve columns?

The Rove 6 shows an alert when it’s time. Typically that’s every 1–2 years depending on how much you use it — it’s not a fixed date, so let the unit tell you.

Why does this kit have fewer parts than the G5 kit?

Because the Rove 6’s output filter is built into the cannula barb and changes just once a year, while the G5 uses a separate output filter changed every month. Fewer replacement parts for the same year of maintenance.

Do I need a technician?

No. It’s all do-it-yourself with clear steps, and the spanner wrench for the annual output filter is included. It’s designed to be simple for older adults and caregivers.

Will it work with the Inogen One G5?

Some parts do — the intake filters and sieve columns are shared — but the G5 has its own kit because its output filter is different and changes monthly. Call us and we’ll point you to the right one.

What do I get by buying the kit instead of the parts separately?

The convenience of having the whole year of maintenance together in one box — no tracking down four separate parts and no four separate orders — plus the schedule for when to change each one, all matched to your Rove 6.