O2 Concepts Oxlife Independence® — Kit de Filtro de Bomba (OEM)

Mantené tu Independence limpio y estable con el repuesto interno oficial.

Protect your portable oxygen investment. The Oxlife Independence® Pump Filter Kit is the official internal filter set that helps keep the compressor pathway clean, supporting stable oxygen concentration and reliable operation. Unlike the external/inlet screens you can wash, the pump filter is not washable; it’s a consumable that must be replaced at manufacturer-recommended intervals or sooner in dusty environments.

If your device has logged many hours, shows “service/filter” notices, or you’ve noticed more frequent alarms in challenging environments, a fresh pump filter is a smart, preventative maintenance step.

Note: This kit is model-specific for the O2 Concepts Oxlife Independence®. It is not compatible with Liberty2 or other concentrators.

---

Key Features

---

What’s in the Box

• 1× Oxlife Independence® Pump Filter (OEM, sealed)

• 1× Quick start card with replacement reminders

(Exact contents may vary by production batch. Keep the pouch sealed until use.)

---

Compatibility

• Works with: O2 Concepts Oxlife Independence® (all standard configurations)

• Does not fit: Oxlife Liberty2®, Inogen, OxyGo, GCE, React, Rhythm, or other brands

If you’re unsure, send us a photo of your device label and we’ll confirm before you buy.

---

Replacement Timing — How Often?

• Typical home use: every 12 months

• High-dust/pet/smoking environments: consider every 6–9 months

• Service indicator or alarm present: replace now and retest

• After long trips in dusty/industrial areas, inspect and plan earlier replacement.

Pump filters are non-washable. Replacing on time helps the compressor work efficiently and supports consistent oxygen purity.

---

Quick Install Guide (high-level)

 

1. Power down the device and unplug AC/DC power.

2. Open the service panel or access point indicated for the pump filter.

3. Remove the used filter (note orientation), insert the new one firmly.

4. Close panel; reconnect power and run a test (listen for normal operation; check for alerts).

5. Log the date/hours so you’ll know when the next change is due.

If you’re not comfortable performing maintenance, our team can guide you or refer you to an authorized service center. Always follow your official user guide.

---

Common Signs It’s Time to Replace

• Device shows a filter/maintenance reminder

• You operate in dusty or pet-heavy homes

• More frequent flow/pressure alerts (with no other cause)

• It has been ~12 months since the last replacement

---

FAQs

1) Is this the same as the inlet filter?

No. The inlet/particle filters are external and often washable. The pump filter is an internal, non-washable consumable you replace.

2) Will a new pump filter fix low oxygen purity?

It can help by restoring proper airflow to the compressor, but purity can be affected by other components (e.g., sieve beds). If alerts persist, contact support.

3) Can I wash or blow out the pump filter?

No. Do not wash or blow it out—replace with a new OEM filter.

4) Do I need a technician to install it?

Many owners can follow the basic, guided steps. If unsure, we’ll assist or refer you to authorized service.

5) Does this fit the Oxlife Liberty2?

No. This kit is only for the Oxlife Independence®.